
Safety Harbor Cabinet Refacing
Cabinet Refacing in Safety Harbor, FL
Cabinet refacing in Safety Harbor FL. New doors, veneer, soft-close hardware. Free estimates, written quotes.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Safety Harbor and nearby communities.
Cabinet refacing swaps out doors, drawer fronts, and exposed box surfaces while keeping your existing cabinet layout in place. No gutting the kitchen, no new plumbing runs, no weeks of living out of a cooler.
Safety Harbor Cabinet Refacing handles this work on homes across Safety Harbor, including original-neighborhood houses where box dimensions don't always match today's stock sizing. Measuring carefully up front keeps the new doors from looking like an afterthought.
What's included
What's included with Cabinet Refacing
Typically included
- On-site measurement of every cabinet box, door, and drawer opening
- New doors, drawer fronts, and matching veneer for exposed box sides
- Hardware installation (hinges, pulls, slides)
- Haul-away of old doors and packaging debris
Optional
- Soft-close hinge and slide upgrades
- Crown molding added to the top of cabinet runs
- Interior shelf refinishing or pull-out organizers
Customer prep
- Clear countertops and empty cabinet contents before install day
- Flag any cabinets with known water damage or loose hinges during the estimate
Want a clearer scope?
Get a Free EstimateHow it works
How our Cabinet Refacing process works
Step 1Cabinet Assessment
Existing cabinet boxes are inspected for structural soundness before refacing begins.
Step 2Design Consultation
Clients review finish and style samples to plan the new cabinet appearance.
Step 3Box Preparation
Surfaces are cleaned and lightly sanded to help new materials adhere properly.
Step 4Veneer Application
Matching veneer is applied to exposed cabinet surfaces for a smooth finish.
Step 5New Door Fitting
Replacement doors and drawer fronts are installed to complete the updated look.
Step 6Quality Check
Each cabinet is inspected for proper alignment, finish consistency, and smooth operation.
Materials
Materials and methods for Cabinet Refacing
Material choice drives both looks and how long the finish holds up in a Gulf Coast kitchen.

Rigid Thermofoil
A durable foil finish wraps cabinet surfaces for a smooth, consistent appearance. It resists daily wear well, though it's not the first pick for homes with high kitchen heat exposure

Wood Veneer
Natural wood veneer offers an authentic grain look over existing cabinet boxes, a common choice on older Safety Harbor homes where box faces are solid but dated.

Adhesive Bonding Agents
Professional-grade adhesives ensure veneer and laminate stay securely bonded long-term, which matters more in a humid coastal climate than people expect.

Matching Drawer Fronts
New fronts are crafted to match replacement doors for a unified design across the whole kitchen.

Edge Banding
Edge banding finishes exposed panel edges for a clean, professional look and helps block moisture at the seam.

Cabinet Hardware Sets
Coordinated hardware sets complete the refaced cabinetry with a polished finish.
Questions on materials?
Get a Free EstimateCost
What does cabinet refacing cost in Safety Harbor?
Cost tracks mostly with cabinet count, door style, and whether the boxes need extra prep. Ask for a free estimate and we'll walk your kitchen in person before quoting a real number.
| Project type | Typical range | What’s included |
|---|---|---|
| Small kitchen refresh | $3,500–$6,000 | 10-14 doors and drawer fronts with standard hardware. |
| Mid-size kitchen | $6,000–$10,500 | 15-24 doors, matching veneer on exposed sides. |
| Large or custom kitchen | $10,500–$18,000 | solid wood doors, soft-close upgrades, molding. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and codes for Cabinet Refacing
Always confirm with Pinellas County or the City of Safety Harbor building department before work starts if your project touches wiring or plumbing.
| Typically needs a permit | Often no permit |
|---|---|
| Relocating or adding electrical outlets behind cabinets | Door and drawer front replacement |
| Plumbing changes under the sink base | Veneer applied over existing boxes |
| Removing or altering structural cabinet boxes | Hardware swaps and soft-close upgrades |
| — | Countertops left in place |
| — | untouched |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Cabinet Refacing
| DIY | Hire a pro |
|---|---|
| Fine for a single small cabinet or a hardware-only swap | Accurate box measurement on non-standard, older Safety Harbor cabinets |
| Requires careful measuring, sanding, and patience with adhesive cure times | Access to commercial-grade adhesives and veneer stock |
| Mismatched box dimensions on older homes can throw off a DIY door order fast | Warranty-backed hardware install and alignment check at the end |
Not sure DIY vs pro?
Get a Free EstimateBefore & after
Before and after Cabinet Refacing

Before 
After
FAQs
Cabinet Refacing FAQs
What are the steps involved in cabinet refacing?
A refacing job starts with an on-site assessment, then design and material selection, box prep, veneer application, new door and drawer installation, and a final quality check.
Is cabinet refacing worth it or should I just replace the cabinets?
If your boxes are solid and square, refacing gets you a new look for less money and less downtime than a full replacement. Replacement makes more sense when boxes are water-damaged or you're changing the kitchen layout.
Can you reface cabinets that are particle board underneath?
As long as the particle board is still structurally sound and not swollen from water exposure. We check this during the assessment before quoting.
What's the difference between refacing and refinishing?
Refacing replaces doors, drawer fronts, and exposed surfaces. Refinishing just strips and repaints or restains what's already there, no new doors involved.
How much does cabinet refacing cost for an average kitchen in Pinellas County?
Most mid-size kitchens run $6,000-$10,500 depending on door style and cabinet count. Smaller galley kitchens can come in lower.
Next step
Get a Cabinet Refacing estimate in Safety Harbor
Call (727) 732-2799 or request a free estimate through our contact form. We'll measure, quote, and give you a real number before anything starts.
Related: Kitchen Cabinet Refacing | Cabinet Door Replacement
More services
Other Cabinet Refacing services

Kitchen Cabinet Refacing
Kitchen cabinet refacing in Safety Harbor FL. Countertops stay, boxes stay, doors and finishes get a full update.

Bathroom Vanity Refacing
Bathroom vanity refacing in Safety Harbor, FL. New doors, moisture-sealed veneer, and hardware over your existing vanity box. Free estimates.

Cabinet Door Replacement
Cabinet door replacement in Safety Harbor, FL. New doors and drawer fronts matched to your existing boxes, hinges included. Free estimates.
Ask about Cabinet Refacing
Tell us about the project and how to reach you.